Menu
4GE+POTS+CATV+ WiFi(2.4G+5.8G
Networking products
Main Brands
Need consultation?
It is designed for fulfilling FTTH and triple play service demand of fixed network operators or cable operators.
The ONU is based on the mature Gigabit GPON technology, which have high ratio of performance to price, and the technology of 802.11 b/g/n Wi-Fi , Layer 2/3, and high quality VoIP as well. They are highly reliable and easy to maintain, with guaranteed QoS for different services. And It is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah, Technical requirement of GPON Equipment (V2.1 and above version) and Technical Requirements of EPON Equipment (V3.0)from China Telecom and other specifications. Provide users with a complete broadband service solution based on optical fiber access technology.
| Port Type | Function |
| TEL port | Connect the telephone with TEL port by telephone wire |
| LAN 1-4 port | RJ45 Port connects to local internet,4 GE ports |
| Reset Button (RST) | Press down reset button and keep 5 seconds to make the device restart and recover from the factory default Settings. |
| PWR port (DC12 V) | Connect with power adapter |
| CATV port | Connect to STB device or TV |
| WPS Button (WPS) | WPS: Press for 3 seconds and press the WPS button of other Wi-Fi devices within 2 minutes to start standard WPS negotiation. |
| Power turn on/off | Power turn on/off |
| Indictors | Status |
| Power | Light On: ONU power supply normally
Light off: ONU No power supply |
| PON | Light on: ONU link active
Blink: ONU manage to link Light Off: ONU receving power rate lower than optical receiver sensitivity |
| LOS | Blink(red):Device does not receive optical signals.
Light off:Device has received optical signal |
| CATV | Input optical power：≥0DBm，or -15DBm≥ |
| Lan 1-4 | Light on:Network port linked, but no data transmitting
Blink: Network port data pass Light Off: The ONU is not powered on or the network cable is disconnected |
| WIFI | Light On:WIFI interface up
Blink:WIFI is sending or/and receiving data (ACT). Light off: WIFI interface down |
| TEL | Light On:Phone has registered to the SIP Server.
Blink:Phone has registered and data transmission (ACT). Light off:Phone registration is incorrect. |
| Parameter | Nominal |
| Connector style | SC/APC |
| PON quantity | 1 |
| Fiber style | Single mode |
| Wavelength | TX：1310+/-20nm
RX：1490+/-10nm |
| PON interface standard | ITU-T G.984/ITU-T G.988/IEEE802.3ah |
| PON interface receiving rate | EPON:1.25Gpbs GPON:2.488Gpbs |
| PON interface transmitting rate | EPON:1.25Gpbs GPON:1.244Gpbs |
| Output optical power | Min:0dBm Max: +4dBm |
| Optical receiver sensitivity | Precede -28dBm |
| The length of the optical link | Max 20km |
| Parameter | Description |
| Antenna | 2T2R Mode; gain:5dBi |
| Rate | 300Mbps IEEE802.11n 866 Mbps IEEE802.11ac
The number of channel :13 for wifi4;12 for wifi5 |
| Encryption methods | WFA、WPA、WPA2、WAPI |
| Tx power | 17dBm for 2.4GHz ;19dBm for 5GHz |
| Rx sensitivity | WIFI4：-59dBm @ channel 11 MCS7;
WIFI5：-50dBm @ channel 155 AC80; |
| WPS function |
Support |
| Parameter | Description |
| Voltage and
Current Monitoring |
The continuously monitors the TIP, RING, and battery voltages and currents via an on-chip Monitor ADC |
| Protocol |
Protocol : SIP; Codec type selection :G722,G729,,G711A,G711U, FAX:T38; |
| Thermal
Overload Shutdown |
If the die temperature exceeds the maximum junction temperature threshold, the device will shut itself down |
Need Help with professional Industrial or Home wifi Solutions? We Are Experts!
Sincere One Technology is specialized in wholesaling branded and OEM 4G USB modem/Datacard/wifi dongle, industrial IOT router, 4G/5G MIFI/mobile hotspot & LTE CPE wifi router/gateway, ONU/OLT as well as power adapter, indoor & outdoor antennas, etc. for worldwide users.
Networking products
Brands
News
Copyright © 2015 - 2024 Shenzhen Sincere One Technology Co Ltd
Get A Quote
