Fast Huawei 4G router B311as-853 desktop WIFI router wholesale

Wholesale Huawei 4G router Huawei B311AS-853 4G cat 4

This 4G LTE router with SIM card

Category 4 150MBps(DL)

Support up to 32 wifi users

Huawei B311As-853 Supports:

-4G LTE: B1/B3/B5/B8/B26/B28/B34/B38/B39/B40/B41(B41: 2545~2655),
-3G UMTS: B1/B5/B8 & TD-SCDMA: B34/B39

-2G GSM:Band 2/3/5/8 1900MHz/1800MHz/850Mhz/900MH

Huawei B311 is a new 4G LTE CPE with LTE Category 4 technology.It can access to up to 32 WIFI devices, which is ideal for home users or entertainment and information exchange hub.

It supports multi-devices simultaneous high speed access, perfect for SOHO’s and small
businesses with its connectivity options of the world.

Huawei 4G router B311AS-853 Technical Specifications:

Huawei 4G router B311AS-853 CPE router Product image:

The B311AS-853 has the following constraints:

1, When the IP Pass-Through mode is enabled, the HOTA function cannot be used.

2, When the L2TP/PPTP VPN client function is enabled, the throughput performance will slow down.

3, A maximum of 32 devices can be connected to the WLAN in theory; the actual number of devices that can be connected and served depends on actual conditions.

Huawei B311AS-853 other features:

1, LTE access function: The B311as-853 adopts the LTE access technology at the WAN side.

2, LAN access function: One 10/100/1000 Mbps high-speed Ethernet ports are provided at the LAN side. It provides the switching function for local networking and sharing of the broadband network when it is connected to terminal devices.

3, AP function: An 802.11b/g/n-compliant WLAN AP interface is provided for wireless networking at home. The interface is compliant with the IEEE 802.11b/g/n standard and the WEP, WPA/WPA2-PSK, WPA2-PSK security authentication mechanisms.

4, DHCP/DNS: The DHCP server dynamically allocates IP addresses to PCs.

5, Web-based management: You can configure the device and modify and view the configuration of this device.

6, IP routing protocol and NAT: The B311 router has high-speed routing capability.

FAQ

How do I restore factory settings?

When the router is turned on, press the Reset button for approximately 3 seconds using a pointed object until the Power indicator starts to blink.

Restoring factory settings will restore the settings to the default. You can reconfigure them after the router is restored.

What should I do if I forgot the Wi-Fi password or the login password for the web based management page?

Restore the router to its factory settings and then use the default Wi-Fi password and login password to try again.

What should I do if the indicator is red or an Internet connection cannot be established?

1 Check if the SIM card is inserted. Refer to the Getting Started section for the right size of SIM card and the right way to insert it into the slot.
2 If the issue persists, restore the router to factory settings and try again.
3 Contact your carrier to check if your SIM card is out of service. If it’s a new card, check if it has been
activated

What should i do if the internet speed is slow?

1 Check the Signal strength indicator on the router. If it shows weak signal , adjust the router’s direction or
move it close to a window to improve signal reception.
2 If your device is connected to the router over Wi-Fi, adjust your device’s position to receive better signal.
3 Restart the router and your device, and try again.
4 Check if you have reached your data traffic limit.

If you are experiencing any other issues with the router:
1 Restart the router.
2 Restore the router to its factory settings.
3 Contact your carrier

Ready to ship Huawei B311-221 4G CPE router

Unlocked CPE router Huawei B311-521 4G Mobile network