New and flexible 5G ZTE MC801A1 WIFI 6 indoor cpe router

Wholesale ZTE 5G smart indoor CPE router MC801A1

ZTE MC801A1 adopts Qualcomm Snapdragon X55 platform. As the second generation 5G modem in Qualcomm, X55 is manufactured by 7nm process, which can support SA+NSA dual-mode 5G network and is compatible with global 5G and 4G mainstream frequency bands. Wi-Fi chip adopts Qualcomm QCA6391, which supports Wi-Fi 6 standard and can support up to 32 users to access at the same time.

It has two frequency bands, 2.4GHz and 5GHz, both of which are 2×2 MIMO, with a maximum bandwidth of 80MHz, a maximum transmission speed of 574Mbps at 2.4GHz, a maximum transmission speed of 1201Mbps at 5GHz, and a dual-frequency concurrent speed of AX1800.

At the same time, it supports the key technologies of Wi-Fi 6, such as uplink and downlink MU-MIMO, OFDMA technology, TWT (target wake-up time), BSS Coloring, etc. It can effectively improve the efficiency of multi-user access, reduce the time delay and improve the user experience while improving the uplink and downlink rate.

In the antenna part, ZTE MC801A1 adopts directional+omnidirectional hybrid antenna technology. The directional antenna of 9dBi can cover a longer distance, so that the ideal network speed can be obtained in the edge area far from the base station; The omni-directional antenna ensures that the equipment can be connected at high speed at different angles.

At the same time, ZTE MC801A1 also applies ZTE’s Smart ANT smart antenna algorithm, which can independently select better signals. In terms of internal heat dissipation, in addition to the vertical chimney duct mentioned above, ZTE MC801A1 also customized a high thermal conductivity radiator, which, together with the thermal phase change material attached to the core chip, ensured the overall internal heat dissipation effect while focusing on ensuring the core unit.

From the outside, ZTE MC801A1 looks like a wireless router. Vertical cylindrical modeling is a popular element in network products nowadays. The design without external antenna brings better integrity, and the volume of 182mm×124mm×70mm is not large. There are a large number of regular cooling holes at the top and bottom of the fuselage, forming a chimney-shaped air duct that runs through from top to bottom, which is beneficial to the heat dissipation of internal components when working. At the same time, the top is also cleverly designed to be suspended, with a runway-like streamline design, officially named “nebula ring”

There are six indicator lights on the front of ZTE MC801A1. The function of the above three SIGNAL lights is the same as the signal logo in the upper right corner of our mobile phone. The more lights are on, the stronger the 5G/4G signal is. The following three chips indicate the working status of network, Wi-Fi and power supply in turn.

With the WPS key on the back, two antenna interfaces are provided below, so users can expand the external antenna with higher power to further improve the coverage of Wi-Fi signals.

There are two gigabit network ports on the back, and users can set one of them as WAN port to connect the cable broadband of operators. Of course, when using the SIM card to connect to the Internet, both network ports can be used as LAN ports to connect with PC, notebook computer and other devices by wire.

5G CPE ZTE MC801A1 Technical Specifications:

5G CPE ZTE MC801A1 Product image:

For young people who rent houses, users who often travel around/organize meetings or activities, small shops, small businesses and people who like camping, hiking and other outdoor activities,  MC801A1 has these flexibility characters, which will make it an ideal choice.

Smart Hub 5G ZTE MC8010ca cpe router indoor unit