New Arrival Tatung Wap-3518 Dual Band wifi Router in Original Box.
Below are some Manual Info for Reference:
Safety Information about Tatung WAP-3518 Router:
Do not let liquids make contact with the router. If this happens, wipe the router with a dry cloth immediately.
Do not use thinner, alcohol, benzene or other chemicals when cleaning the box.
To avoid electrical shock, do not disassemble the case.
To prevent overheating and damage to the router, avoid placing router in areas with dust and sand.
To avoid areas with strong magnetic fields, do not place the router near metallic objects or similar
environments.
Do not place the router under direct sunlight or expose router to extreme temperatures.
Do not drop, hit, or place heavy objects on the router.
Easy Mesh Set Up for Tatung WAP-3518
Controller Device Set up:
a) Use network cable and connect your modem or router LAN port to the LAN port on the first WAP-3518 and plug in the power supply.
b) Connect to the WAP-3518 device with a smart device (notebook or mobile phone)
Wired connection — Connect to the LAN port of the WAP-3518 device via the RJ-45 cable.
Wireless connection — a wireless network connected to the WAP-3518 device
SSID TTI_3518_5G or TTI_3518_2.4G Password 00000000 (default value)
c) Launch a web browser, type in the IP address (192.168.10.1) in the browser’s address bar of the WAP-3518 device.
d) On the login page, type in the default user name (admin) and password (admin).
e) Follow the setup steps below to set up the Controller Device.
- Click the EASYMESH tab on the left menu.
- Then select the Role as a Controller (wlan0 is the default value for the Backhaul BSS).
- Click Save & Apply to finish the Controller Device set up
Agent Device Set up for WAP-3518
a) Plug the power adapter in to the second WAP-3518.
b) Connect to the second WAP-3518 device with a smart device (notebook or mobile phone)
Wired connection — Connect to the LAN port of the WAP-3518 device via the RJ-45 cable.
Wireless connection — a wireless network connected to the WAP-3518 device
SSID TTI_3518_5G or TTI_3518_2.4G
Password 00000000 (default value)
c) Launch a web browser, type in the IP address (192.168.10.1) in the browser’s address bar of the WAP-3518 device.
d) On the login page, type in the default user name (admin) and password (admin).
e) Follow the setup steps below to set up the Controller Device.
Click the EASYMESH tab on the left menu.
Then select the Role as an Agent (wlan0 is the default value for the Backhaul BSS).
Click Save & Apply to finish the Agent Device set up.
Easy Mesh Connection Set up for WAP-3518 Router
a) Press and hold the WPS bottom of the first (Controller) and the second WAP-3518 (Agent) for more than two seconds, until the power light of both flash orange indicating that the WPS pairing is in progress.
b) Wait until the power light turn to green solid light, which indicates the WAP-3518 Controller and Agent has been successfully connected wirelessly.
c) If necessary, you can set the third WAP-3518 (Agent), refer to the: Agent Device Set up & Easy Mesh
Connection Set up
