New arrival Nokia Fastmile 5g gateway 3 (model 5G12-12W-A) in original box
The FastMile 5G Gateway 3 supports 5G NR and 4G LTE WAN connectivity. The device is compliant with 3GPP Rel-15 standards. Actual throughputs will vary based on aggregated bandwidths, network topology, network load, and radio conditions.
Your device can operate either in 5G NR or in 4G LTE. Where both 4G and 5G are available, the FastMile 5G Gateway 3 supports dual connectivity EN-DC.
5G NR provides best download and upload speeds, thus improved user experience for data services such as Internet browsing and video streaming. In case 5G NR coverage is not available in your area, the device can also operate with 4G LTE only as your WAN connection.
The FastMile 5G Gateway 3 provides the following features:
- 4G and 5G WAN connection
- 4G/LTE multi-band omni-directional antenna connectivity (up to 5dBi)
- TEL port for voice service: TEL port may be blocked and unavailable to certain
providers - 5G NSA/SA omni-directional antenna and high gain directional antenna
connectivity depending on 5G FR1 band (up to 11dBi) - 5G NSA/SA WAN connectivity with omni and high gain antennas
- self-contained integrated residential gateway
- Nokia Wi-Fi connectivity:
- 4×4 IEEE 802.11ax 2.4 GHz (40 MHz) WLAN interface, with MU-MIMO
- 4×4 IEEE 802.11ax 5 GHz (80 MHz) WLAN interface, with MU-MIMO
- Wi-Fi 5 support (IEEE 802.11ac)
- Wi-Fi 6 support (IEEE 802.11ax) – dual band 4+4 connectivity
- backward compatible with 802.11a/b/g/n/ac
- PIN-locked SIM cards: a SIM PIN number is required to unlock the SIM card and
a SIM PUK and PIN number are required to unblock the SIM card - one logical temperature sensor on IPQ and one logical temperature sensor on
the modem - supports WebUI configuration to enable or disable single SSID: if enabled the
CPE will merge 2.4 GHz band SSID and 5 GHz band SSID, and automatically
select the frequency band that provides a faster speed - can operate in the following modes: LTE-only, LTE-5G, EN-DC 5G SA
Below table Identification of FastMile 5G Gateway 3 supported models and variants:
Model | Kit part number | Description | Device part number on bottom label |
5G12-13W-A | 3TG-00800-AAAA | Unit without TEL port | 3TG-00799-ABAA |
3TG-00800-BAAA | Unit with TEL port | 3TG-00799-ABAB |
Below are some images of 5G12-13w-A stock:








16:57:44
Nokia FastMile 5G Gateway 3 (5G12-13W-A): Revolutionizing Fixed Wireless Access
By [Your Name], Technical Writer
Introduction
The Nokia FastMile 5G Gateway 3 (model 5G12-13W-A) represents a significant leap in Fixed Wireless Access (FWA) technology, offering high-speed internet connectivity to homes and businesses via 5G networks. Designed to bridge the digital divide, this gateway enables reliable broadband access in underserved areas, complementing or replacing traditional wired solutions like fiber or DSL. With its robust 5G capabilities and advanced Wi-Fi features, the FastMile Gateway 3 is a cornerstone for telecom operators deploying next-gen FWA services.
Key Features
- 5G Connectivity
- Supports 5G NR (New Radio) across sub-6 GHz and mmWave bands (specific bands depend on regional configurations), ensuring compatibility with global 5G deployments.
- Utilizes Carrier Aggregation (CA) and Massive MIMO for enhanced signal strength and throughput.
- Dual-mode 5G (NSA/SA) support for seamless integration into evolving network architectures.
2. High-Performance Wi-Fi 6
- Equipped with Wi-Fi 6 (802.11ax) for faster speeds, reduced latency, and improved capacity in dense environments.
- Dual-band (2.4 GHz + 5 GHz) operation with MU-MIMO and beamforming to optimize coverage.
- Supports up to 256 connected devices, ideal for smart homes or small offices.
3. Advanced Antenna Design
- Integrated high-gain antennas with optional external antenna support for superior signal reception, even in challenging environments.
- Beamforming technology directs Wi-Fi signals to connected devices, minimizing interference.
4. Simplified Deployment
- Plug-and-play setup via the Nokia FastMile App, enabling users to self-install with guided instructions.
- Remote management for operators through Nokia’s IMPACT platform, streamlining provisioning and updates.
5. Enterprise-Grade Security
- WPA3 encryption for secure Wi-Fi networks.
- Built-in firewall, VPN support, and automatic firmware updates to safeguard against threats.
6. Robust Hardware
- Multiple Gigabit Ethernet ports for wired connections (exact number varies by configuration).
- Compact, wall-mountable design with passive cooling for silent operation.
Technical Specifications of Noika 5G Gateway 3
- 5G Bands: Sub-6 GHz (e.g., n78) and mmWave (e.g., n258), carrier-dependent.
- Wi-Fi: Dual-band Wi-Fi 6 (up to 3 Gbps aggregate throughput).
- Ports: 4x Gigabit Ethernet, 1x WAN/LAN port, USB for diagnostics.
- Power: 12V DC; supports PoE (Power over Ethernet) for flexible placement.
- Dimensions: Compact form factor (~200 x 200 x 50 mm).
- Operating Temperature: -20°C to +55°C (suitable for indoor/outdoor use with proper housing).
Benefits
- Cost-Effective Broadband: Eliminates the need for expensive fiber trenching, ideal for rural or remote areas.
- Low Latency: <10 ms latency enables gaming, 4K streaming, and video conferencing.
- Scalability: Operators can rapidly deploy services without infrastructure overhauls.
- Future-Proof: Ready for 5G Advanced and network slicing, ensuring long-term relevance.
Use Cases
- Residential Connectivity: Deliver gigabit-speed internet to homes lacking fiber access.
- Small Business Solutions: Provide reliable, high-capacity connectivity for remote offices.
- Temporary Deployments: Rapidly set up connectivity for events, construction sites, or disaster recovery.
- Urban Densification: Address network congestion in high-density apartments.
Conclusion
The Nokia FastMile 5G Gateway 3 (5G12-13W-A) is a game-changer in the FWA landscape, combining cutting-edge 5G and Wi-Fi 6 technologies to democratize high-speed internet access. By offering operators a scalable, user-friendly solution, Nokia continues to lead the charge in bridging connectivity gaps worldwide. As 5G networks expand, devices like the FastMile Gateway 3 will play a pivotal role in shaping an inclusive digital future.
The differences between the Nokia FastMile 5G Gateway 3 (5G12-13W-A) and 5G12-13W-B models are typically subtle and often relate to regional configurations, supported frequency bands, or minor hardware/software optimizations. While Nokia does not always publicly disclose granular details for every variant, here are the most common distinctions based on industry practices and product naming conventions:
1. Regional Band Support
- 5G12-13W-A: Likely configured for specific 5G frequency bands in a particular region (e.g., Europe, Asia, or North America).
- Example: May prioritize n78 (3.5 GHz) for Europe or n41/n71 (2.5 GHz/600 MHz) for North America.
- 5G12-13W-B: Tailored for a different geographic market or carrier, with support for alternate 5G bands.
- Example: Could include mmWave bands (n258/n260) for ultra-high-speed deployments in the U.S. or Japan.
2. Cellular Modem Configuration
- The -A and -B suffixes might denote differences in 5G modem capabilities:
- 5G12-13W-A: May focus on sub-6 GHz for broader coverage.
- 5G12-13W-B: Could emphasize mmWave support for extreme speeds in dense urban areas (depending on operator requirements).
3. Wi-Fi Features
- While both models likely support Wi-Fi 6 (802.11ax), the -B variant might include incremental upgrades, such as:
- Wi-Fi 6E (6 GHz band support) for reduced congestion.
- Enhanced MU-MIMO streams or transmit power for better coverage.
4. Power over Ethernet (PoE)
- Some variants may differ in power delivery options:
- The -A model might include PoE support out-of-the-box.
- The -B model could require an external PoE injector or omit PoE for cost optimization.
5. Antenna Design
- External antenna ports:
- One variant may include connectors for external antennas (e.g., for rural deployments), while the other relies solely on internal antennas.
6. Firmware/Software Customizations
- The -A and -B models might ship with carrier-specific firmware:
- Example: The -A could be locked to Operator X, while the -B is customized for Operator Y.
- Differences in management interfaces (e.g., TR-069 vs. OMCI protocols).
7. Regulatory Certifications
- The suffixes often reflect compliance with regional regulations (e.g., FCC for the U.S., CE for Europe, or RCM for Australia).
How to Confirm Exact Differences
1,Check Nokia’s Official Documentation:
- Product datasheets or technical specifications for each model (search for 5G12-13W-A vs. 5G12-13W-B).
2,Operator-Specific Details:
- Carriers often publish unique specs for their variants (e.g., Verizon vs. AT&T).
3,Hardware Labels:
- Labels on the device or packaging may list supported bands or certifications.